FESTOOL Module Router MFK 700 EQ Set 574368- DISCONTINUED

Description

**Replaced by 576239**

Powerful 720 watt (6.0 amp) motor can easily tackle most trimming, profiling and routing applications with variable speed and detachable cord.

Vertical and horizontal extra-wide bases provides ample support area for maximum control especially near edges or on narrow stock.

Micro-adjustable depth control to 1/256 inch (1/10 mm) with dual locking columns for precise routing control.

Threaded insert to accept template guides and phenolic resin baseplate to easily glide on a surface without marring the material to be routed.

With its modular design and tool-less base changes, the MFK 700 can easily transform from a vertical to a horizontal position with a few simple steps. Trim laminate and edge band or rout grooves for inlays easily with the light weight and maneuverable MFK 700. Packed with features, this trim router saves you money by allowing you to use bearing-less bits when used with the attachable base feeler bearing. 1/256″ (1/10 mm) fine depth adjustments and exceptional dust extraction make this an ideal router for all of your light routing tasks.

Due to the nature of the horizontal base design, there is a limit to the bit size for use in this configuration. Do not use a bit with a cutting length greater than 5/8″ (16 mm) and a shank length of 1-13/16″ (46 mm). For greatest range of adjustment a 3/4″ (19 mm) bit diameter is recommended.

Recommended FESTOOL bits – 491 666 and 491 670 for trimming of edge banding with horizontal base.

dia. 5/16″ clamping collet (8 mm); 1.5 Degree Horizontal Base Unit for MFK Router; extraction hood; open ended spanner, WAF 19 in SYSTAINER SYS 2 T-LOC

Includes:
dia. 5/16″ clamping collet (8 mm)
1.5 Degree Horizontal Base Unit for MFK Router
extraction hood
open ended spanner, WAF 19

Specifications:
Idle engine speed: 10 000 – 26 000 RPM
Routing depth fine adjustment range: 1/2″ (14 mm)
Max. cutter diameter: 1-1/4″ (32 mm)
Dust extraction connection dia.: 1-1/16″ (27 mm)
Weight: 4.19 lbs (1.9 kg)
Power consumption: 720 watt
Collet dia.: 1/4″ – 5/16″ (6 – 8 mm)