Description

Flat Out Flat Water Based Top Coat
Flat Out Flat is a self-crosslinking water-based topcoat that mimics the lustrous look and feel of wax. The increased matting agents used to create “flat look” cause this wood finish to have less clarity, show fingerprints more and provide less durability than High Performance. It is recommended for medium to low-use surfaces other than kitchen cabinets and table tops.

Basic Features

• Product Colors Water White in can (dries clear)
• Base Type Water
• Ambering No
• Sheen Very Flat (1-5)
• Interior or Exterior Interior only
• Tintable No
• Type Self-crosslinking Acrylic

Application

• Coats 3 coats
• Application Method Brush, Roll, Spray
• Brushable Yes
• Usable over existing finishes Yes
• Sprayable Yes
• Spray Tip Sizes HVLP 1.1mm-1.3mm
• Topcoat Required Self-Sealing
• Dry Time
• Dry Time – Touch 30+ min.
• Dry Time – Recoat 2+ hr
• Dry Time – Light Use 7-10 days
• Dry Time – Cure 21 days

Contents

• Can Sizes Pints, Quarts, Gallons
• Coverage 65-75 sq.ft./pint, 125-150 sq.ft./quart, 500-600 sq.ft./gallon

Technical Data

• Viscosity Medium
• Viscosity (cPs) 350-450
• Weight Solids 24%
• VOC US VOC
• < 250 g/L

Durability

• Durability (Highest, High, Medium, Low) Low
• Hardness (Koenig #) 89
• Wear (Taber #) 50.00 mg loss
• Water (5 max) 4
• Chemical (105 max) 86