Description

INSTANT BOND ACTIVATOR

Titebond Instant Bond is a two-part bonding system that takes between 5 – 15 seconds to set and 30 – 60 seconds for initial cure. It provides a strong, permanent bond and is ideal for hard to reach joints or surface areas that are difficult to clamp. Designed primarily for wood and wood products, this adhesive is also very effective on a wide variety of materials and substrates. Instant Bond Activator is used to accelerate the curing of all Titebond Instant Bond Adhesives. The Activator is especially effective for large gaps, very porous woods and bridge bonding joints, bonding acidic surfaces or in low humidity conditions. It is a heptane-based solvent that will not mar finishes or damage plastics.

Features & Benefits

• Designed for use with all Titebond Instant Bond Adhesives
• Accelerates the curing of Titebond Instant Bond Adhesives
• Especially effective for large gaps, very porous woods and bridge bonding joints
• Useful when bonding acidic surfaces or in low humidity conditions
• Heptane-based solvent will not mar finishes or damage plastics

Application Guidelines

• Application Temperature: Above 50°F (10°C)
• Assembly Time After Application : Immediate (70°F : 50% RH)
• Method of Application: Spray bottle or brush
• Limitations: Titebond Instant Bond Activator is not intended for exterior use or where moisture is likely. Store in a cool, dry place. Handling and set times of Titebond Instant Bond Adhesives may be affected by environmental conditions. Product is extremely flammable. Keep away from heat, sparks and flame.