Description

G0858 8″ x 76″ Parallelogram Jointer w/ Helical Cutterhead

Advanced woodworking made simple with an 8″ jointer.

The G0858 Parallelogram Jointer has a 4-row helical cutterhead with 36 indexable carbide inserts. Carbide inserts reduce tear-out and last an average of 10 times longer than traditional jointer knives.

Each insert can be rotated up to three times to expose a new sharp edge for superior finish. Reducing the cut to the size of a single insert makes for a cleaner cut and reduces noise compared to the traditional straight knife cut.

With the parallelogram table setup, the four points of contact allow for easy adjustment of each table for perfect alignment. The 8″ x 76″ precision-ground cast-iron table is long enough to handle your longest stock hardwoods.

The arched table travel keeps each table close to the cutter and adds a degree of safety during operation. Setting cut depth is a breeze for traditional jointing or rabbeting with the infeed and outfeed adjustment levers.

SPECIFICATIONS:

• Motor: 3 HP, 230V, single-phase, 12A
• Maximum width of cut: 8″
• Maximum depth of cut: 1/8″
• Maximum rabbeting depth: 1/2″
• Cutterhead diameter: 3-1/16″
• Cutterhead type: 4-Row helical with 36 inserts
• Insert size, type: 15 x 15 x 2.5mm, Indexable carbide
• Cutterhead speed: 5500 RPM
• Table size: 8″ x 76″
• Fence size: 38″ x 4-1/2″
• Minimum stock length: 10″
• Minimum stock thickness: 1/2″
• Dust port size: 4″
• Footprint: 16″ x 40″
• Overall dimensions: 76″ W x 25″ D x 41-1/2″ H
• Approximate shipping weight: 487 lbs.