Amana Tool 49360 Carbide Tipped Superabbet 2 Dia x 7/8 x 1/2 Inch Shank
$131.79
SUPERRABBET 2″ DIA. 1/2 SHANK.
Specification
Diameter (D) 2
Cutting Height (B) 7/8
Shank (d) 1/2
Overall Length (L) 3
Flutes 2
C 5/8 & 3/4
Only 1 left in stock
Description
This ingenious tool features both interchangeable cutting edges and an interchangeable guide collar, enabling you to cut a wide range of rabbets. Changing the collars on the twin ball-bearing guide steps the cut width in 1/16″ increments from flush through 3/4″ with five extra “plywood” sizes.
Between the standard and optional collars, there are 18 different rabbet sizes available. The deep guide collar design adds stability to the tool for hand-held router operations. The basic 2″-diameter bit includes a hex key, instructions, and all necessary parts for 5/8″ and 3/4” width rabbets.
The “RC” version has extra-long double-edged carbide inserts which enables the bit to cut 30mm high. Inserts can be rotated or replaced without removing the bit from the router.
Maximum RPM 22,000.
Use in a table-mounted router. Not for use in a handheld router!
Additional information
| Shank Size | 1/2" |
|---|---|
| Bit Profile | Rabbet |
