Showing 1–24 of 26 results
-

$2,869.00
Maksiwa Portable Edgebander CBC.EC – 1 Phase
Manual
Glue: Granulated Hot-Melt Low Temperature
Glue Temperature: 130º to 180º C
Max. tape width: 3”
Tape thickness: 0.3 mm – 2 mm
Feeder speed: 21 ft/min
Power: 1,300 W
Motor: 1 Phase
Volts/Amps: 127 V – 10,2 A or 220 V – 5,5 A
Weight: 114 Lbs
-

$11,549.00
MAKSIWA – SLIDING PANEL SAW PLATINUM – BMP.3200.IR
Warranty
-

-

-

$3,999.00
Maksiwa POCKET HOLE MACHINE – PHM.30
Manual
Related Videos
-

$319.00
Maksiwa Panel Carrier? TC3000
Manual
Minimum table height: 33? (845 mm)
Maximum table height: 37? (945 mm)
Equipment dimension: 43?x 49? x 28? (1,100 mm x 1,240 mm x 710 mm)
Maximum capacity: 254 Lbs
Maximum panel size: 108? x 1? x 72? (2,750 mm x 30 mm x 1,840 mm)
Weight: 70.5 Lbs
-

$649.00
Maksiwa Workbench for Edge Trimmer MA.1000
Bench top: 39″ x 16-1/2″
Max. holding capacity: 441 Lbs
Weight: 48 Lbs
-

$2,629.00
Maksiwa Line Boring Pneumatic 13 Spindle Line LBP.13
Manual
Motor: 1 HP, 110 V or 220 V
Prewired: 110 V, Single – Phase – 10 A / 5 A
Table Size: 31 x 15-1/2
Spindle Speed: 3.450 RPM
Fence Stops: 2
Expandable Fence Guide Max.: 89 Inches
Operation: Pneumatic
Floor to Table Height: 34 Inches
Max. Depth of Stroke: 2.5 Inches
Lenght of Fence: 61.5-5-91.5 Inches
Number of Spindles: 13 (6 Left and 7 Right)
Distance Between Spindle Centers: 32 mm
Shipping Weight: 155 Lbs
-

$2,169.00
Maksiwa Line Boring Manual 13 Spindle Line LBM.13
Manual
Motor: 1 HP, 110 V or 220 V
Prewired: 110 V, Single – Phase – 10 A / 5 A
Table Size: 31 x 15-1/2
Spindle Speed: 3.450 RPM
Fence Stops: 2
Expandable Fence Guide Max.: 89 Inches
Operation: Manual
Floor to Table Height: 34 Inches
Max. Depth of Stroke: 2.5 Inches
Lenght of Fence: 61.5-5-91.5 Inches
Number of Spindles: 13 (6 Left and 7 Right)
Distance Between Spindle Centers: 32 mm
Shipping Weight: 155 Lbs
-

$1,819.00
Maksiwa Contour Edge Bander CBC.FLEX – 1 Phase
Manual
Glue: Granulated Hot-Melt Low Temperature
Glue Temperature: 130? to 180? C
Tape height: 0-35/64? to 1-57/64?
Tape thickness: 0.3 mm – 1 mm
Feeder speed: 0 to 19 ft/min
Power: 700 W
Motor: 1 Phase
Volts/Amps: 127 V – 5,5 A or 220 V – 2,5 A
Weight: 21 Lbs
-

-

$899.00
Maksiwa Dust Collector CPD/3.C – 3HP, 3Phase, 3 ENTRIES
Manual
Bag volume: 307 L (10.8 ft³)
Number of air intel: 3
Air suction capacity: 2,760 ft³/min
N: 79″
Motor: 3 HP – 1 or 3 phases
Volts/Amps:
1 phase: 127 V – 34 A or 220 V – 17 A
3 phases: 220 V – 9 A or 380 V – 5.2 A
Weight: 130 Lbs
-

$2,299.00
Maksiwa Portable Edgebander CBC.E – 1 Phase
Manual
Glue: Granulated Hot-Melt Low Temperature
Glue Temperature: 130º to 180º C
Max. tape width: 3”
Tape thickness: 0.3 mm – 2 mm
Feeder speed: 21 ft/min
Power: 1,300 W
Motor: 1 Phase
Volts/Amps: 127 V – 10,2 A or 220 V – 5,5 A
Weight: 114 Lbs
-

$569.00
Maksiwa Portable Table Saw SC.650.I
Manual
Blade diameter: 10″
Table dimensions: 32-1/2″ x 19-3/4″
Blade tilt: 45º left
Laser guide: Yes
Max. working height 45º: 2-1/8″
Max. working height 90º: 3-1/8″
Sliding table track: 14″
Speed: 5,000 RPM
Motor: 1 phase
Volts/Amps: 127 V – 11.8 A or 220 V – 6.8 A
Weight: 77 Lbs
-

$518.00
Maksiwa Manual Slitter 160 mm (6.3″) F.160
Manual
Motor: No Motor
Tape Thickness: 1 mm (0.03″)
Max. Width: 160 kg (6.3″)
Feed Speed: Manual
Weight: 16 kg ( 35.3 lbs)
-

$655.00
Maksiwa Combination Belt and Disc Sander 6″ x 9″ LDF
Table size: 12-3/8″ x 6-1/4″
Table tilt: 0º to 45º
Belt tilt: 0º to 90º
Ø disc: 9″
Belt dimensions: 48″ x 6″
Belt speed: 20.7 ft/s
Disc speed: 1,700 RPM
Motor: 3/4 HP – 1 or 3 phases
Volts/Amps:
1 phase: 127 V – 13.8 A or 220 V – 6.9 A
3 phases: 220 V – 2.8 A or 380 V – 1.6 A
Weight: 134 Lbs
-

$285.00
Maksiwa 12″ Disc Sander LD.300
Table size: 17-1/2″ x 6″
Table tilt: 0º to 45º
Ø disc: 12″
Speed: 1,720 RPM
Motor: 1 HP – 1 phase
Volts/Amps: 127 V – 16 A or 220 V – 8 A
Weight: 86 Lbs
-

$219.00
Maksiwa Roller Stand 9 Roller PRA/9
Workstand dimension: 65″ x 19-3/4″
Min. height: 26″
Max. height: 41-3/4″
Nº of rollers: 9
Load capacity: 440 Lbs
Weight: 66 Lbs
-

$1,040.00
Maksiwa Mortiser FH.16.C – 1 or 3 Phase
Mobile table dimensions: 18-1/8″ x 7-4/8″
Horizontal table track: 5-3/8″
Vertical table track: 8-5/8″
Chuck track: 4-7/8″
Chuck capacity: 5/8″
Clamp device: Eccentric
Motor: 3 HP – 1 or 3 phases
Volts/Amps:
1 phase: 127 V – 34 A or 220 V – 17 A
3 phases: 220 V – 9 A or 380 V – 5.2 A
Weight: 242.5 Lbs
-

$402.00
Maksiwa 10″ Miter Saw MK.300.I with Laser Guide and Dual Sliding Rail
Blade dimensions: 10″
Table tilt: 45º left and right
Blade tilt: 45º left
Compound cut: Yes
Extension table: Yes
Dual sliding rail: Yes
Laser guide: Yes
Location of bevel control: Front
Power: 2,000 Watts
Volts/Amps: 127 V – 15.7 A or 220 V – 9 A
Weight: 48 Lbs
-

$257.00
Maksiwa 10″ Miter Saw with Laser Guide MK.200.I
Blade dimensions: 10″
Table tilt: 45º left and right
Blade tilt: 45º left
Compound cut: Yes
Extension table: Yes
Laser guide: Yes
Location of bevel control: Front
Power: 1,800 Watts
Volts/Amps: 127 V – 14.1 A or 220 V – 2.18 A
Weight: 40 Lbs
-

$1,749.00
Maksiwa Wood Jointer 8″ x 71″ 2 HP – DE.1800/4 – 1 or 3 Phases
Table lenght: 70-7/8”
Table widht: 7-7/8”
Max. depth capacity: 1/8″
Speed: 5.900 RPM
Number of knives: 4
Knife dimensions: 200 x 30 x 3 mm (7-29/32″ x 1-13/64 x 3/32”)
Fence tilt: 45º to 90º
Motor: 2 HP – 1 or 3 phases
Volts/Amps:
1 phase: 127 V – 24 A or 220 V – 12 A
3 phases: 220 V – 6.5 A or 380 V – 3.8 A
Weight: 461 Lbs
-

$999.00
Maksiwa Wood Jointer 6″ x 47″ 1 HP DE.1200/3 – 1 or 3 Phases
Table lenght: 47-2/8″
Table widht: 6″
Max. depth capacity: 1/8″
Speed: 5,200 RPM
Number of knifes: 3
Knife dimensions: 158 x 18 x 3 mm (6-13/64“ x 45/64” x 3/32”)
Fence tilt: 45º to 90º
Motor: 1 HP – 1 or 3 phases
Volts/Amps:
1 phase: 127 V – 16 A or 220 V – 8 A
3 phases: 220 V – 3.5 A or 380 V – 2.1 A
Weight: 267 Lbs
-

$529.00
Maksiwa Dust Collector CP/2.C – 2HP – 2 Entries – 1 or 3 Phases
Manual
Bag volume: 153 L (5,4 ft³)
Number of air intel: 2 entries
Air suction capacity: 1,790 ft³/min
Bag size: 18″ x 34 inches
Motor: 2 HP – 1 phase
Motor Amp Draw: 1 phase: 127 V – 24 A or 220 V – 12 A
Weight: 106 Lbs
** ETA 03/2022 **