-
$2,869.00Maksiwa Portable Edgebander CBC.EC – 1 Phase
Manual
Glue: Granulated Hot-Melt Low Temperature
Glue Temperature: 130º to 180º C
Max. tape width: 3”
Tape thickness: 0.3 mm – 2 mm
Feeder speed: 21 ft/min
Power: 1,300 W
Motor: 1 Phase
Volts/Amps: 127 V – 10,2 A or 220 V – 5,5 A
Weight: 114 Lbs
-
$11,549.00MAKSIWA – SLIDING PANEL SAW PLATINUM – BMP.3200.IR
Warranty
-
-
-
$3,999.00Maksiwa POCKET HOLE MACHINE – PHM.30
Manual
Related Videos
-
$419.00Maksiwa Panel Carrier? TC3000
Manual
Minimum table height: 33″ (845 mm)
Maximum table height: 37″ (945 mm)
Equipment dimension: 43 x 49″ x 28″ (1,100 mm x 1,240 mm x 710 mm)
Maximum capacity: 254 Lbs
Maximum panel size: 108″ x 1″ x 72″ (2,750 mm x 30 mm x 1,840 mm)
Weight: 70.5 Lbs
-
$649.00Maksiwa Workbench for Edge Trimmer MA.1000
Bench top: 39″ x 16-1/2″
Max. holding capacity: 441 Lbs
Weight: 48 Lbs
-
$2,629.00Maksiwa Line Boring Pneumatic 13 Spindle Line LBP.13
Manual
Motor: 1 HP, 110 V or 220 V
Prewired: 110 V, Single – Phase – 10 A / 5 A
Table Size: 31 x 15-1/2
Spindle Speed: 3.450 RPM
Fence Stops: 2
Expandable Fence Guide Max.: 89 Inches
Operation: Pneumatic
Floor to Table Height: 34 Inches
Max. Depth of Stroke: 2.5 Inches
Lenght of Fence: 61.5-5-91.5 Inches
Number of Spindles: 13 (6 Left and 7 Right)
Distance Between Spindle Centers: 32 mm
Shipping Weight: 155 Lbs
-
$2,169.00Maksiwa Line Boring Manual 13 Spindle Line LBM.13
Manual
Motor: 1 HP, 110 V or 220 V
Prewired: 110 V, Single – Phase – 10 A / 5 A
Table Size: 31 x 15-1/2
Spindle Speed: 3.450 RPM
Fence Stops: 2
Expandable Fence Guide Max.: 89 Inches
Operation: Manual
Floor to Table Height: 34 Inches
Max. Depth of Stroke: 2.5 Inches
Lenght of Fence: 61.5-5-91.5 Inches
Number of Spindles: 13 (6 Left and 7 Right)
Distance Between Spindle Centers: 32 mm
Shipping Weight: 155 Lbs
-
$1,819.00Maksiwa Contour Edge Bander CBC.FLEX – 1 Phase
Manual
Glue: Granulated Hot-Melt Low Temperature
Glue Temperature: 130? to 180? C
Tape height: 0-35/64? to 1-57/64?
Tape thickness: 0.3 mm – 1 mm
Feeder speed: 0 to 19 ft/min
Power: 700 W
Motor: 1 Phase
Volts/Amps: 127 V – 5,5 A or 220 V – 2,5 A
Weight: 21 Lbs
-
-
$899.00Maksiwa Dust Collector CPD/3.C – 3HP, 3Phase, 3 ENTRIES
Manual
Bag volume: 307 L (10.8 ft³)
Number of air intel: 3
Air suction capacity: 2,760 ft³/min
N: 79″
Motor: 3 HP – 1 or 3 phases
Volts/Amps:
1 phase: 127 V – 34 A or 220 V – 17 A
3 phases: 220 V – 9 A or 380 V – 5.2 A
Weight: 130 Lbs
-
$2,299.00Maksiwa Portable Edgebander CBC.E – 1 Phase
Manual
Glue: Granulated Hot-Melt Low Temperature
Glue Temperature: 130º to 180º C
Max. tape width: 3”
Tape thickness: 0.3 mm – 2 mm
Feeder speed: 21 ft/min
Power: 1,300 W
Motor: 1 Phase
Volts/Amps: 127 V – 10,2 A or 220 V – 5,5 A
Weight: 114 Lbs
-
$569.00Maksiwa Portable Table Saw SC.650.I
Manual
Blade diameter: 10″
Table dimensions: 32-1/2″ x 19-3/4″
Blade tilt: 45º left
Laser guide: Yes
Max. working height 45º: 2-1/8″
Max. working height 90º: 3-1/8″
Sliding table track: 14″
Speed: 5,000 RPM
Motor: 1 phase
Volts/Amps: 127 V – 11.8 A or 220 V – 6.8 A
Weight: 77 Lbs
-
$518.00Maksiwa Manual Slitter 160 mm (6.3″) F.160
Manual
Motor: No Motor
Tape Thickness: 1 mm (0.03″)
Max. Width: 160 kg (6.3″)
Feed Speed: Manual
Weight: 16 kg ( 35.3 lbs)
-
$655.00Maksiwa Combination Belt and Disc Sander 6″ x 9″ LDF
Table size: 12-3/8″ x 6-1/4″
Table tilt: 0º to 45º
Belt tilt: 0º to 90º
Ø disc: 9″
Belt dimensions: 48″ x 6″
Belt speed: 20.7 ft/s
Disc speed: 1,700 RPM
Motor: 3/4 HP – 1 or 3 phases
Volts/Amps:
1 phase: 127 V – 13.8 A or 220 V – 6.9 A
3 phases: 220 V – 2.8 A or 380 V – 1.6 A
Weight: 134 Lbs
-
$285.00Maksiwa 12″ Disc Sander LD.300
Table size: 17-1/2″ x 6″
Table tilt: 0º to 45º
Ø disc: 12″
Speed: 1,720 RPM
Motor: 1 HP – 1 phase
Volts/Amps: 127 V – 16 A or 220 V – 8 A
Weight: 86 Lbs
-
$219.00Maksiwa Roller Stand 9 Roller PRA/9
Workstand dimension: 65″ x 19-3/4″
Min. height: 26″
Max. height: 41-3/4″
Nº of rollers: 9
Load capacity: 440 Lbs
Weight: 66 Lbs
-
$1,040.00Maksiwa Mortiser FH.16.C – 1 or 3 Phase
Mobile table dimensions: 18-1/8″ x 7-4/8″
Horizontal table track: 5-3/8″
Vertical table track: 8-5/8″
Chuck track: 4-7/8″
Chuck capacity: 5/8″
Clamp device: Eccentric
Motor: 3 HP – 1 or 3 phases
Volts/Amps:
1 phase: 127 V – 34 A or 220 V – 17 A
3 phases: 220 V – 9 A or 380 V – 5.2 A
Weight: 242.5 Lbs
-
$402.00Maksiwa 10″ Miter Saw MK.300.I with Laser Guide and Dual Sliding Rail
Blade dimensions: 10″
Table tilt: 45º left and right
Blade tilt: 45º left
Compound cut: Yes
Extension table: Yes
Dual sliding rail: Yes
Laser guide: Yes
Location of bevel control: Front
Power: 2,000 Watts
Volts/Amps: 127 V – 15.7 A or 220 V – 9 A
Weight: 48 Lbs