80 drop ship
Maksiwa 12″ Disc Sander LD.300
Table size: 17-1/2″ x 6″
Table tilt: 0º to 45º
Ø disc: 12″
Speed: 1,720 RPM
Motor: 1 HP – 1 phase
Volts/Amps: 127 V – 16 A or 220 V – 8 A
Weight: 86 Lbs
Maksiwa Dust Collector 1HP CP/1.C – 1 Entry
Bag volume: 60 L (2.12 ft³)
Number of air intel: 1
Air suction capacity: 600 ft³/min
Bag size: 13″ x 25 inches
Motor: 1 HP – 1 phase
Motor Amp Draw: 1 phase: 127 V – 16 A or 220 V – 8 A
Weight: 73 Lbs
Maksiwa Dust Collector CP/2.C – 2HP – 2 Entries – 1 or 3 Phases
Bag volume: 153 L (5,4 ft³)
Number of air intel: 2 entries
Air suction capacity: 1,790 ft³/min
Bag size: 18″ x 34 inches
Motor: 2 HP – 1 phase
Motor Amp Draw: 1 phase: 127 V – 24 A or 220 V – 12 A
Weight: 106 Lbs
Maksiwa Edge Trimmer Machine RBB.1000
Max trim height: 2-3/8”
Table lenght: 39″
Table width: 6 to 16″
Trimmer speed: 32,000 RPM
Power: 500 Watts
Volts/Amps: 127 V – 4.3 A or 220 V – 2.5 A
Weight: 42 Lbs
Maksiwa Manual Slitter 160 mm (6.3″) F.160
Motor: No Motor
Tape Thickness: 1 mm (0.03″)
Max. Width: 160 kg (6.3″)
Feed Speed: Manual
Weight: 16 kg ( 35.3 lbs)
Maksiwa 10″ Miter Saw with Laser Guide MK.200.I
Blade dimensions: 10″
Table tilt: 45º left and right
Blade tilt: 45º left
Compound cut: Yes
Extension table: Yes
Laser guide: Yes
Location of bevel control: Front
Power: 1,800 Watts
Volts/Amps: 127 V – 14.1 A or 220 V – 2.18 A
Weight: 40 Lbs
Maksiwa 10″ Miter Saw MK.300.I with Laser Guide and Dual Sliding Rail
Blade dimensions: 10″
Table tilt: 45º left and right
Blade tilt: 45º left
Compound cut: Yes
Extension table: Yes
Dual sliding rail: Yes
Laser guide: Yes
Location of bevel control: Front
Power: 2,000 Watts
Volts/Amps: 127 V – 15.7 A or 220 V – 9 A
Weight: 48 Lbs
Maksiwa Panel Carrier? TC3000
Minimum table height: 33″ (845 mm)
Maximum table height: 37″ (945 mm)
Equipment dimension: 43 x 49″ x 28″ (1,100 mm x 1,240 mm x 710 mm)
Maximum capacity: 254 Lbs
Maximum panel size: 108″ x 1″ x 72″ (2,750 mm x 30 mm x 1,840 mm)
Weight: 70.5 Lbs
Maksiwa Contour Edge Bander CBC.FLEX – 1 Phase
Glue: Granulated Hot-Melt Low Temperature
Glue Temperature: 130? to 180? C
Tape height: 0-35/64? to 1-57/64?
Tape thickness: 0.3 mm – 1 mm
Feeder speed: 0 to 19 ft/min
Power: 700 W
Motor: 1 Phase
Volts/Amps: 127 V – 5,5 A or 220 V – 2,5 A
Weight: 21 Lbs
Maksiwa Roller Stand 9 Roller PRA/9
Workstand dimension: 65″ x 19-3/4″
Min. height: 26″
Max. height: 41-3/4″
Nº of rollers: 9
Load capacity: 440 Lbs
Weight: 66 Lbs
Maksiwa Portable Table Saw SC.650.I
Blade diameter: 10″
Table dimensions: 32-1/2″ x 19-3/4″
Blade tilt: 45º left
Laser guide: Yes
Max. working height 45º: 2-1/8″
Max. working height 90º: 3-1/8″
Sliding table track: 14″
Speed: 5,000 RPM
Motor: 1 phase
Volts/Amps: 127 V – 11.8 A or 220 V – 6.8 A
Weight: 77 Lbs
Maksiwa Workbench for Edge Trimmer MA.1000
Bench top: 39″ x 16-1/2″
Max. holding capacity: 441 Lbs
Weight: 48 Lbs
Rikon 80-805 8″ Slow Speed Bench Grinder
Due to factory environmental upgrades this item has been back ordered until 10/23/2020. We encourage you to complete your order so that when they arrive you can receive it right away. They will go fast. You will still be able to cancel your order up until 48 hours prior to shipping. If you have any questions please call 904-619-7935.
